Viavi SmartClass OLP-85 Series Скачать руководство пользователя страница 8

Страница: 8 / 84

OLP-85/OLP-85P

1 I

NTRODUCTION

YMBOLS

USED

THIS

OPERATING

MANUAL

Symbols used in this operating manual

Various elements are used in this operating manual to draw

attention to special meanings or important points in the text.

Symbols and terms used in warnings

The following warnings, symbols and terms are used in this

document in compliance with the American National Standard

ANSI Z535.6-2011:

Warning format

All warnings have the following format:

NOTICE

Follow the instructions carefully to avoid damage or

destruction to the instrument.

CAUTION

Follow the instructions carefully to avoid a low or medium risk

of injury to persons.

WARNING

Follow the instructions carefully to avoid servere injury to

persons.

DANGER

Follow the instructions carefully to avoid death or severe

injury to persons.

High voltage

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to high

voltage.

Laser

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to laser

radiation. Information specifying the laser class is also given.

WARNING

Type and source of danger

Consequences of ignoring the warning.

Action needed to avoid danger.

Содержание SmartClass OLP-85 Series





















































































Результаты поиска

Содержание SmartClass OLP-85 Series

Отзывы:

Viavi SmartClass OLP-85 Series, Руководство по эксплуатации, Страница: 8 / 84

Результаты поиска

Содержание SmartClass OLP-85 Series

Отзывы: