60
OLP-85/OLP-85P
9 D
ATA
M
ANAGEMENT
D
ATA
MANAGEMENT
OF
P
OWERMETER
TESTS
Managing test results
To select/deselect a test result:
There are several ways to select and deselect test results:
1.
Tap an entry once to highlight it, tap it again to select it.
2.
Use the up/down arrows to highlight an entry and press the
center key to select it.
3.
Press the
[
A
]
key and tap the
[
Select All
]
button to select all.
4.
Press the
[
A
]
key and tap the
[
Deselect All
]
button to deselect
all.
NOTE:
The selection state of the highlighted entry toggles. The check
mark in the first column shows in light grey when an entry is
deselected and in dark grey when it is selected.
To view test results in full screen:
I
The measurement data overview is displayed.
1.
Select one or more test results from the list.
2.
Press the
[
A
]
key and tap the
[
View Selected
]
button.
The first selected result will be displayed.
Measurement Data of Powermeter Test
Fiber ID
Test label name
[nm]
Wavelength
Pow [dBm]
measured Powermeter value
Pow [Watt]
Pow [dB]
Ref [dBm]
Reference value
Pass/Fail
Passed/failed label
Limit [dBm]
Limit value
Auto
optional Auto
mode
Tone
Tone value
Timestamp
Time and date of the test
