Viavi SmartClass MPOLP-85, Руководство по эксплуатации

Страница: 39 / 115

MPOLx-84/85 (P) 39
5 M
ANAGING PROJECTS
T
EST
-T
OOL MODE
5
M
ANAGING PROJECTS
Stored Measurements are assigned to a project. Therefore a
project first has to be created and set to active. As factory setting
one Test-Tool project named default is available, which can be
edited but not deleted. New projects can be created by copying
and changing an existing project or by creating a new one.
With the project some basic information like the project name, a
description of the project and how the label is build can be
saved.
NOTE: Test-Tool projects can be created and edited on the device.
Workflow projects can be created only in Viavi's Cloud-based
Enterprise Workflow Management Tool CERTiFi. It needs to be
downloaded to the device from a Mobile App. (see “Workflow
mode” on page 84 ).
Fig. 10 Project assignments
Test-Tool mode
The Test-Tool mode is the “classic” mode when a specific test
application is needed instead of executing a predefined test
sequence. To start a test application a Test-Tool project first must
be selected. Thus, at least one Test-Tool project is defined as
default. This section just explains how to select a Test-Tool
project and a test application. The various test applications are
described in the following chapters.