OLTS-85
71
9 M
EMORY
M
ANAGEMENT
U
SING
THE
L
INK
D
ATA
M
ODE
Using the Link Data Mode
In case of applying different measurements e.g. Tier 1, PCM
inspection and probe inspection on one DUT, the saved results
of all application are assigned to a dedicated project and FiberID.
So, all measurements on one fiber performed with different
applications can be easily assigned by the reporting software
FiberChekPRO. The parameters for saving or reading data can be
set only globaly from the homescreen menue for all applications
simultaneously.
To create a project:
√
The homescreen is displayed.
1.
Press the
[
A
]
key.
2.
Tap the
[
Data
]
button.
3.
Tap the
[
Data Settings
]
button.
4.
Tap the
[
Create Project
]
button.
5.
Type in a
Project Name
, e.g. "CO_MillerSt.16".
6.
Tap the
[
OK
]
button.
The project is created.
To activate the Link Data Mode:
√
The homescreen is displayed.
√
The desired project is selected.
1.
Press the
[
A
]
key.
2.
Tap the
[
Data
]
button.
3.
Tap the
[
Link Data Mode
]
button.
A paperclip symbol appear in the status bar.
4.
Press the
[
F
]
key to exit the menu.
To set your Link Data Mode parameters:
√
The
Data
menu is displayed.
1.
Set your Prefix, e.g. "CablePair".
2.
Set your Index to the initial value, e.g. "1".
To start the application and save the measurements:
√
The homescreen is displayed.
√
Tap on the desired application, e.g. Tier 1 Test.
1.
Perform a measurement.
2.
Press
[
G
]
key.