Viavi ONX-220, Руководство пользователя

Страница: 87 / 212

ONX-220 User's Guide
22135173, Rev. 000 June 2020 87
Chapter 4 CATV Testing
Quick Check
The Quick Check test provides the ability to quickly check for signal presence on a small
number of manually added channels.
To run a Quick Check
1. Select Quick Check under the CATV menu header. The Quick Check Setup screen
appears.
2. Select the desired demarcation point to be tested: Tap, Ground Block or CPE. A
graphic showing the appropriate connection schematic for this test will appear
along with appropriate instructions for the port to be used.
3. Assign this test to a saved work order (optional but recommended).
Select the Work Order ID button and the list of available work orders will
appear. Select one.
4. Configure the carrier to be checked by adding or removing the carrier frequency
and type.
5. Start the test by selecting the Start button at the bottom of the screen.