Viavi ONX-220, Руководство пользователя

Страница: 75 / 212

ONX-220 User's Guide
22135173, Rev. 000 June 2020 75
Chapter 3 Menus and Workflow
Enter Work Order
All test setups have the option to assign the test to a Work
Order Number.
This is highly recommended because the data analysis
performed by the OneExpert compares to previous data from
the current location as defined by the Work Order number.
Activated Work Order ID also allows faster Auto Channel plan
build functionality.
On each Setup screen, the button below the heading Work
Order ID will show the currently loaded Work Order.
To run a test assigned to a previously loaded Work
Order
1. On the setup screen for the test you are running,
select the Work Order ID button. The currently
loaded Work Order is the default.
2. Select any listed Work Order from the list of loaded
work orders, then press Enter .
To run a test at location and create a new Work Order
1. On the setup screen for the test you are running, select the Work Order ID
button.
2. Add new Work Order.
3. Enter the name of the new Work Order (up to 50 characters), then press
Enter .