Viavi ONX-220, Руководство пользователя

Страница: 100 / 212

ONX-220 User's Guide
22135173, Rev. 000 June 2020 100
Chapter 6 Data Testing
About Data Tests
The Data Tests are available using the Tests & Settings button
when testing Ethernet circuits.
Ping and Traceroute testing (optional)
The Ping test sends a ping packet through the modem to an IP
address or DNS name (could be a network switch or web address) to test for connectivity. This
is an optional feature.
The Traceroute test sends a packet through the modem to an IP address or DNS name (could
be a network switch or web address), then traces each hop from the source (your instrument)
to its destination. When running the application, the response time and hops traversed by the
packet appear on the Traceroute screen.
1. If you haven’t done so, specify the settings for the Ethernet interface and then connect
to the line.
2. Select the Tests & Settings button. The Data Tests menu appears.
3. Do one of the following:
y
Press Ping .
y
Press Traceroute .
4. Press the Settings button and then specify the Ping or Traceroute settings.
y
Select Destination Type and then select IPv4 Address, IPv6 Address, or DNS
Name.
y
Enter the Destination IP address or DNS name.
y
If you are specifying settings for a Ping test, specify the Transmit Count (how
many total ping packets to send), Transmit Interval (amount of time between
packet transmittals), and Transmit Size (how many ping messages are in each
packet).
5. Press the Results button.
6. Use the Tray menu to save the results. See "Saving a report" on page 57 .