VIAVI//Public
OneAdvisor 1000 High-Speed Network Testing Platform
OneAdvisor/ 1000 Portable Network Tester
Q U I C K C A R D
Ethernet Y.1564 Layer 2 Traffic
This quick card describes how to configure and run a Y.1564 Layer 2 Traffic Test for Metro
Ethernet service activation.
Figure 1: Equipment Requirements
L A U N C H T E S T
1.
Press the Power button to turn on the
OneAdvisor.
2.
Press the
400G Module
icon at the
screen top to display the
Launch Screen
.
3.
Using the
Select Test
menu, Quick Launch
menu, or Job Manager, launch the Ethernet
Y.1564 SAMComplete Multiple Streams test on
Port 1 for the desired rate. For Example:
Ethernet
►
1GigE Optical
►
Y.1564 SAMComplete
►
L2 Traffic
►
P1 Terminate.
4.
Tap the button next to “
Start a New
Configuration (reset to defaults)
”
Figure 2: Launch Screen
Figure 3: Y.1564 SAMComplete test
•
OneAdvisor 1000 400G Module equipped with the following:
o
Transport software release V3.1.0 or greater
o
CA10M1GE test option for 10 Megabit to 1 Gigabit Ethernet
o
CA10GELAN test option for 10 Gigabit Ethernet
o
CA25GE test option for 25 Gigabit Ethernet
o
CA40GE test option for 40 Gigabit Ethernet
o
CA50GE test option for 50 Gigabit Ethernet
o
CA100GE test option for 100 Gigabit Ethernet
o
CA200GE test option for 200 Gigabit Ethernet
o
CA400GE test option for 400 Gigabit Ethernet
•
Optical Transceiver supporting the line rate to be tested (SFP or QSFP)
•
Cables to match the optical transceiver and the line under test
•
Fiber optic inspection microscope (P5000i or FiberChek Probe)
•
Fiber optic cleaning supplies