Viavi OLP-88 Скачать руководство пользователя страница 12

Страница: 12 / 90

OLP-88

2 S

AFETY

NFORMATION

ASER

SAFETY

Laser safety

WARNING

Dangerous laser radiation

Laser radiation can cause irreparable damage to eyes and

skin.

The maximum permitted power for the OLP-88 means that the

optical input signals can reach hazard level.
Bear this in mind when using the OLP-88. In particular, the

instrument is equipped with a through channel that transmits

all the optical radiation from the input to the output without

attenuation, even when the OLP-88 is switched off.

►

Please note that also in broadband mode light is emitted at

the unconnected port.

►

Always be aware of the hazard level of the instrument to be

connected.

►

Connect all optical fibers before switching on the radiation

source.

►

Switch off the laser source before disconnecting the optical

fibers.

►

Never look directly into the unconnected port of the

instrument, the output of a laser source, or an optical fiber

connected to a source or a system.

►

Always cover unused ports.

►

Be aware that the emitted light is not visible.

►

Heed the normal precautions for working with laser radiation

and consider local regulations.

Содержание OLP-88



























































































Результаты поиска

Содержание OLP-88

Отзывы:

Viavi OLP-88, Руководство пользователя, Страница: 12 / 90

Результаты поиска

Содержание OLP-88

Отзывы: