50
OLP-88
7 M
EMORY
M
ANAGEMENT
S
AVING
RESULTS
Saving results
Results are stored simply by pressing the
[
G
]
key. Each time the
key is pressed, the results will be stored.
Note:
If an instrument with integrated patch cord microscope
is connected to a Digital Probe, the images for the PCM
and the Digital Probe will be stored in different folders.
To save current results successively:
√
The instrument is in application mode.
√
Link Data Mode
is not activated.
1.
Press the
[
A
]
key.
2.
Tap the
[
More
]
button.
3.
Tap the
[
Measurement Data
]
button.
4.
Press the
[
A
]
key.
5.
Tap the
[
More
]
button.
6.
Tap the
[
AutoInc FiberID
]
button to set the checkmark.
7.
Press the
[
G
]
key.
The Fiber ID edit menu is displayed:
8.
Type in the
Fiber ID
.
9.
Tap the
[
OK
]
button.
The measurement is stored.
10.
Press the
[
G
]
key again every time you want to save a an
additional result value.
The display briefly shows the Fiber ID used.
Note:
If the
Fiber ID
is not changed, the data set will be saved
under the same title. Depending on the active
application, the
Data
can be distinguished by the
Timestamp
.