Viavi MTS 4000 Base Unit, Руководство пользователя

Страница: 73 / 254

Chapter 4 System set-up
Configuring the unit
User Manual 77000000206 Rev. 007
51
Phone number A phone number or other comment may also be
added in order to provide more information :
number to call in case of emergency, user
telephone number...
Country
Choosing language (Language)
Select one of the languages offered, using the direction keys
→
or
←
.
Resetting the date
Change the date by using the direction keys → or ← .
Resetting the time
– Use the direction keys → or ← to change the minutes and hours .
Choosing date and time format
Choose one of the options: dd/mm/yy or mm/dd/yy for the date format.
Use the direction keys → or ← to change the hour format (12 hour clock
/ 24 hour clock).
I/O Interface
Remote screen
It is possible to remote the screen of the 4000 Platform on to a PC and
to read the contents of the disk of the 4000 Platform on a PC. To do this,
see .
"Accessing the 4000 Platform from a PC" page 35
Remote screen = Session or Permanent or Permanent with Pass-
word must be confirmed in both cases, in the Interface E/S window .
Session Mode the remote screen function is inactive once
the 4000 Platform is switched off.
Permanent Mode the remote screen function is still active
when the 4000 Platform is switched off and
restarted.
Permanent with Password same function as the Permanent mode, with
an access to the equipment via VNC
protected by a password:
42000
No the screen cannot be remote on a PC.
NOTE
The ENGLISH CAPS parameter allows to get a display in English,
with all words in capitals.