4
g4gigaflow - 5
Configuring your system
There are a number of items to do to get your system on your network and ready
to use.
Startup and shutdown
There are several procedures to turn on or off your system.
First plug in the power cord
1.
Plug the power cords into the rear of the power supplies.
2.
Wait until the blue Information LED starts to blink.
3.
Press the power button once. The control board initiates the power up
sequence in three seconds.
After normal shutdown by IPMI or power button
Press the power button once.
After a power loss
The system will power up automatically approximately fifteen seconds after the
power returns.
Power down
Turn off the unit using a clean operating system shutdown from Windows.
1.
Release the power button after blue LED stops blinking and goes dark.
2.
The shutdown sequence will begin and shut down the system within ten
seconds.
How to set the IP address
Setting the IP address ensures the hardware appliance has a visible and
permanent network presence.
