10
FBP-HD4i/HD4iP / OLP-82/82P
3 O
PERATION
S
ETTING
U
P
PASS/FAIL A
NALYSIS
3
O
PERATION
Setting Up PASS/FAIL Analysis
Select acceptance criteria
Inspection (Probe)
1.
Open the
INSPECT (Probe)
application.
2.
Press
MENU
.
3.
Select
PROFILE
(choose desired PROFILE from list)
.
4.
Select
TIP
(choose from list)
.
Inspection (PCM)
1.
Open the
INSPECT (PCM)
application.
2.
Press
MENU
.
3.
Select
PROFILE
(choose desired PROFILE from list)
.
Set up OPM PASS/FAIL thresholds
I
Wavelengths are measured in dBm.
1.
Open the
POWER METER
application.
2.
Select
MORE... > EDIT WAVELENGTH TABLE
.
3.
Select a wavelength from the list.
4.
Press
MENU
.
5.
Select
ENTER LIMIT
.
6.
Enter you desired limit value
(measured in dBm)
using the
numeric keypad.
7.
Press
OK
.
8.
Repeat steps 4–7 for all desired OPM wavelengths.
9.
Check the boxes for only the wavelengths you want to use.