Chapter 3
System Settings Screens
System Settings Screens
Rev. 001
CX300 ComXpert Operation Manual
22130634
3 - 16
February, 2022
The
Remote screen
contains the following controls and settings:
Table 3-11 Remote Controls and Settings
Control/Setting
Description
Remote Button
Device Name
This field defines the name associated with the test set. The
device name is associated with the name that is seen when
using Bluetooth.
Remote access
password
This field defines the password that is used when the
Require
password for VNC access
check box is selected.
VNC Settings
Enable VNC
Access
This check box enables or disables remote access to the test
set.
When remote access is enabled, the
Remote
button
appears in the Device Toolbar.
Require
password for
VNC access
This check box selects if a password is required to remotely
access the test set. The password is defined in the
Remote
access password
field.
Smart Access
Anywhere
Smart Access Anywhere allows users to view and control the
CX300 user interface (UI) from a remote workstation. In addition
to configuring the instrument and performing tests, you can
transfer files to and from the CX300 using the File Manager.
section 4.9.6, “Transferring Files with Smart Access”, on page
for information.
See section 4.9, “Using Smart Access Anywhere”, on page 4-16
for detailed instructions for installing and using the Smart Access
Anywhere utility.