Chapter 7
Managing Files and Reports
Managing Files
Rev. 001
CX300 ComXpert Operation Manual
22130634
7 - 4
February, 2022
7.1.4 Creating a Report
To create a report:
1.
Press the
Save
(
) Button.
2.
Press the
Folder
(
) Button to select the storage location.
3.
Select the
File Name
input field.
4.
Enter the file name to use when saving the file.
5.
Select the
Report
file type.
a. Select the
Report Setup
box.
b. Insert the company image using the
Button.
c. Enter the company name in the
Company Name Here
field.
d. Enter the name of the person who performed testing in the
Your Name
Here
field.
e. Enter the company or site address in the
Address
field.
f.
Enter a description about the site or place in the
Site Information
field.
g. Enter the purpose of the test in the
Test Purpose
field.
h. Enter a summary of the test results in the
Result
field.
6.
Press the
Image Add
(
) button to add up to six screen shots.
7.
Press the
Apply
button.
7.1.5 Loading Files
The CX300 File Browser is used to access and manage files stored on the device or on a
USB flash drive that is connected to device. You can load your saved screen, result, and
setup from the internal memory or your external USB memory drive, USB A or USB B or SD
card.
To Load a File
1.
Press the File Browser
Button
.
2.
Press the
Folder
(
)
Button
to select the file location.
3.
Select the file to be loaded from the internal memory or from your USB drive.
4.
Check the file information on the right pane.
5.
Press the
Load Button
to load the file.