Chapter 3 Installing CPRIAdvisor CAP-100 and CAE-100
CPRIAdvisor Installation Guide
19
Rear view
Figure 4
CPRIAdvisor CAE-100 rear view
No.
Description
COM port
Optical input port
COM port
You can use this port to connect the optical cable to 16xLC optical ports of the rear of the CAP-100.
You can extend up to 16 CAE-100 by connecting the optical cable to this COM port.
NOTE
You need to connect the COM port to an optical port that is positioned in the
same location of ID+1 of the CAE-100.
Optical input port
You can use this port to connect the optical LC cable. You can connect 36xLC optical ports per each
CAE-100.
Installing the CPRIAdvisor CAP-100
After inspecting your shipment, follow the procedure below to install the CPRIAdvisor CAP-100.
Procedure
To install with a 19-inch rack:
1
Using a Phillips-head screwdriver, install the brackets with screws provided.
2
Mount the CAP-100 to both ends of a 19-inch rack.
