Viavi Certifier Series, Руководство пользователя, Страница: 11 / 25

1. The Status bar displays the current date, talkset and battery level.
2. The Channel Selector provides selection on which channel loss limit will be
applied on a 12 core MPO cable during an AUTOTEST.
3. The Test Settings group provides results oriented configurations necessary
to perform an AUTOTEST.
4.
The Project Settings group provides non-results oriented configurations
before performing an AUTOTEST.
5.
The System Settings group settings provides device, time, localization and
device related configurations. The Information group at the top provides
hardware information such as the device Information (Local/Remote), name,
battery level, etc.
The One Touch Access Buttons
The fundamental philosophy behind the Certifier User Interface is simplicity in its
ease of use. The main functions of the One-Touch access buttons as follows:
AUTOTEST
The “ AUTOTEST”
button will perform an immediate certification test on
the last configured settings. If no settings were configured, default
settings will be used.
Test results will be generated automatically after the test is completed.
You will receive any of the following 4 results after the “AUTOTEST”:

Green “PASS” – Good test result in accordance to pre-defined
settings.

Red “FAIL” – Unacceptable results with severe disturbance on
one or more test parameters.
You will be given the following option after performing an AUTOTEST:

“Save” test results to device
An “AUTOTEST” will fail in the event of missing connection between the Local and
Remote units, wrong settings configured,
“dirty” end connectors or broken cables.