Viavi CellAdvisor JD700B Series Скачать руководство пользователя страница 38

Страница: 38 / 813

Chapter 2

Getting Started

JD700B Series User’s Guide

desired keyword, and then tap the

Keyboard

button. See “Appending a keyword” on page

809 for more information.

To change the file location in the internal memory or to your USB memory drive, touch the

Location

button, select your desired file path using the touch screen or the rotary knob,

and then press the

Apply

soft key.

To create a folder, press the

Create Folder

soft key, type a directory name, and then press

the

Apply

soft key.

Press the

Done

soft key.

The “

Event Save

” appears on the screen and the

Start

screen menu changes to

Stop

Press the

Stop

soft key to end the event saving.

Saving logging data

You can save logging data if the measurement mode supports the feature and has the activated Save
Logging Data soft key.

Procedure

Press the

SAVE/LOAD

hot key.

The Save/Load menu bar appears.

Press the

Save

soft key.

Press the

Save Logging Data

soft key.

The on-screen keyboard appears.

Type the name of the file in the

File Name

field with or without using a keyword.

Optional.

Complete the following steps:

To create or edit keywords, touch the

Edit Keywords

button, select your desired keyword

button in the upper screen, type a keyword, and then tap the

Save

button on the keyboard.

See “Editing or adding a custom keyword” on page 808 for more information.

To include a keyword in the file name, touch the

Append Keywords

button, select your

desired keyword, and then tap the

Keyboard

button. See “Appending a keyword” on page

809 for more information.

To create a folder, press the

Create Folder

soft key, type a directory name, and then press

the

Apply

soft key.

To change the file location in the internal memory or to your USB memory drive, touch the

Location

button, select your desired file path using the touch screen or the rotary knob,

and then press the

Apply

soft key.

NOTE

In is recommended that you use an external USB memory drive to save logging data in
the Auto Measure mode in order to have enough free space.

Optional only in the Auto Measure mode

Toggle the

Save Screen

soft key and select

All

to save all the Auto Measure screens or

Fail

save only the ones with the Fail on.

Press the

Save

soft key to start logging.

The “

Recording

” appears on the screen.

Press the

ESC

hard key to stop logging data and complete saving.

Using load

You can load your saved screen, result, setup, and limit from the internal memory or your external USB
memory drive.

Procedure

Press the

SAVE/LOAD

hot key.

Содержание CellAdvisor JD700B Series














































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CellAdvisor JD700B Series

Отзывы:

Viavi CellAdvisor JD700B Series, Руководство пользователя, Страница: 38 / 813

Результаты поиска

Содержание CellAdvisor JD700B Series

Отзывы: