Viavi CellAdvisor 5G, Руководство пользователя, Страница: 270 / 359

Using DSS Signal Analyzer
258
1 Tap the Setup ( )icon on the side bar.
2 Tap Bandwidth from the following choices: 5 MHz , 10 MHz , 15 MHz , or 20 MHz .
3 Tap to switch Signal Tech Type to TDD or FDD .
4 Tap Menu > BW/AVG > Average to set the number of measurements to be averaged using the on-screen keyboard.
The input value range is from 1 to 100.
Setting limit
1 Tap Menu > Limit .
2 Tap to switch the Test Limits to On or Off to enable or disable Pass/Fail indication.
The result table color for Pass is green, and the result table color for Fail is red.
3 Optional. Tap the Save hot key on the side bar and select the save option form the choices available for your measurement
mode.
ACLR measurement with 5G DSS Analyzer
Multi-ACLR
The Multi-ACLR measurement is used to perform multi-channel ACLR measurements with as many channels as possible. It helps
you to measure ACLR in multi-channel transmitting Base Station environment.
Setting measure setup
After configuring spectrum measurement in " Configuring Spectrum Measurements ", you can set the measure setup to continue your
measurement. The measurement settings can be saved and recalled as a file by selecting File Type as Setup and load the file onto
the instrument using the
Save/Load icons on the side bar.
1 Tap the Setup ( )icon on the side bar.
2 Tap Bandwidth from the following choices: 5 MHz , 10 MHz , 15 MHz , or 20 MHz .
3 Tap to switch Signal Tech Type to TDD or FDD .
4 Tap Menu > BW/AVG > Average to set the number of measurements to be averaged using the on-screen keyboard.
The input value range is from 1 to 100.
Setting limit
1 Tap Menu > Limit .