Viavi CellAdvisor 5G, Руководство пользователя, Страница: 257 / 359

CellAdvisor 5G User's Guide
245
NOTE:
If you tap the Close (X) button of the Carrier Setting screen, the above list appears with constellation information
for each carrier. If you select NR carrier, you can select to view either PBCH or PBCH DM-RS under the
constellation information.
Route map
NSA route map traces the power level of the NR signal's beam and the power level of the strongest LTE signal in terms of RSRP
and corresponding a particular time and geographical position and presents it in a geographical map as a measurement point. All
the collected measurements can be exported for post-processing purposes, including data of the eight strongest beams for each
measurement point, including its measurement time and geographical location.
Loading a map
To use any features related to maps, you need to download and install the maps on the CellAdvisor 5G. The VIAVI JDMapCreator
will help you download maps. Make sure the JDMapCreator application on your computer is connected to the instrument via LAN.
You can send a map file with a single layer to the instrument directly by using the
Send to EQP menu in JDMapCreator. For more
information on how to use the JDMapCreator, see the JDMapCreator 2.0 User Guide .
1 Plug in your USB flash drive that has a map file in
.mcf
file type created in JDMapCreator.
2 Tap the Load icon( ) on the side bar.
3 Navigate the map file you want to open.
The File Information pane displays the file properties including its name, size, type, and date modified.
4 Tap the Load button on the screen.
Once you load the map, you can also control the map using the following icons on the map. (The left-most Cellsite icon is activated
when you import the cellsite information file. Refer to below
Importing cellsite DB .)
Icon Description
Tap to go to your current location on the map. Once tapped, the purple icon appears on the map indicating your
current location.
Tap to switch to the full screen map view.
Tap to zoom in the map.
Tap to zoom out the map.
Tap and select the area where you want to expand.
Setting measure setup
Before starting the Route Map measurement, you need to set Spectrum measurements displayed on the quick access and display
tab. See "
Configuring Spectrum Measurements " for more details. The setup menus for NSA route map are available in the screen
with two categories: general setting and carrier setting. For Map Configuration, you need to tap Menu icon on the side bar.