Viavi CellAdvisor 5G, Руководство пользователя, Страница: 211 / 359

CellAdvisor 5G User's Guide
199
240 720 0 to 48 240 0 to 2
4 Tap SSB Frequency and input the value using the on-screen keyboard.
5 Tap GSCN and input the value using the on-screen keyboard.
Based on the GSCN input frequency, the SSB frequency changes automatically.
6 Tap L to set the maximum number of SS-PBCH blocks within a single SS burst set (A set of SS being transmitted in 5 ms
window of SS transmission) among 4 , 8 and 64 .
Refer to the selection criteria based on the table in Step 2 .
7 Tap SSB Auto Search Mode and do the following steps:
a Tap Auto Preamp/Atten and switch SSB Auto Search to Start to set preamp and attenuation automatically.
b Tap Manual and switch SSB Auto Search to Start for manually setting based on your need.
NOTE
If you tap SSB Auto Search to Start, the searching progress screen appears to let you know the status of searching.
You can tap SSB Auto Search to Stop to stop searching.
8 Tap SSB Periodicity and select the options from 5 ms , 10 ms , 20 ms , 40 ms , 80 ms , 160 ms .
The SS burst period (SSB periodicity) is defined by each base station and network configurable. 20 ms is the default for the
initial cell selection.
9 Tap to switch PCI ( Physical Cell ID ) to Manual or Auto .
10 Tap PCI and input a value from 0 to 1007 using the on-screen keyboard.
The PCI switches to Manual .
11 Tap to switch Sorting Type to PCI or RSRP .
If you select PCI, it shows PCI information on the measurement screen and if you select RSRP, it shows S-SS RSPR power on
the measurement screen. You can also set it in the Detected ID List table.
NOTE:
You can go to Menu > Frequency > Center Frequency List to add frequently used center frequency using the
Add button in the Frequency List or to delete the selected frequency using the Delete button. You can also apply
one of the default frequencies in the Frequency List by tapping the Apply button.
Beam analyzer measurement