Viavi CellAdvisor 5G, Руководство пользователя, Страница: 208 / 359

Using 5G NR Signal Analyzer
196
Multi-ACLR measurement with 5G NR
NOTE
You can set the Lowest Ref. Frequency and Highest Ref. Frequency by tapping the rectangle with value using the
on-screen keyboard.
Spurious emissions
The Spurious Emissions measurement is to identify or determine the power level of in-band or out-of-band spurious emissions
within the necessary channel bandwidth and modulated signal. The CellAdvisor 5G indicates either Pass or Fail based on the
specified limit of the signal. Frequency extended up to 18.5 GHz in addition to existing 24 GHz to 40 GHz.
Setting measure setup
After configuring spectrum measurement in " Configuring Spectrum Measurements ", you can set the measure setup to continue your
measurement. The frequency setting is not used in the Spurious Emissions mode. The measurement settings can be saved and
recalled as a file by selecting File Type as Setup and load the file onto the instrument using the
Save/Load icons on the side bar.
1 Tap the Setup ( )icon on the side bar.
2 Tap BS Type and select the option from 1-C/1-H , 1-O , or 2-O .
Set 1-C (Conducted)/1-H (Hybrid) for multi-band operation with mapping of transceivers to one or more antenna connectors (1-
C) or TAB (transceiver array boundary) connectors for 1-H. Set 1-O when BS operates at FR1 and 2-0 when BS operates at
FR2.
3 Tap Measure Type and select the option from Transmitted or Receiver .
4 Tap to switch Setting to User if you want user defined setting and tap Configuration or Configuration ( )icon.
a Tap Range under the chart screen and switch to On to display or Off to hide the selected range in the result table.
You can select the range number between 1 and 20 to add as a new or change the existing settings.
b Tap Start Frequency/Stop Frequency and enter the value for the selected range using the on-screen keyboard.
c Tap Start Limit / Stop Limit and enter the lower limit/upper limit for Pass/Fail indication.
d Tap Attenuation / RBW / VBW and specify or select the value.
5 Tap to switch Setting to 3GPP if you want 3GPP standard defined setting and tap Configuration or Configuration
( )icon.
a Tap Range under the chart screen and switch to On to display or Off to hide the selected range in the result table.
You can select the range number between 1 and 20 to add as a new or change the existing settings.