Viavi Apex Enterprise G3-APEX-ENT-32T Скачать руководство пользователя страница 344

Страница: 344 / 380

Understanding time stamps

344 GigaStor (23 Feb 2018) — Archive/Non-authoritative version

Can I upgrade a Network Instruments-manufactured, blue GigaStor to Observer 17.2 or

later?

Yes, if you have an active maintenance contract. No new features are available on

the Gen2 capture card as a result of this name change.

Can I put a Gen3 capture card in a Network Instruments-manufactured, blue GigaStor?

No, the Gen3 capture card is only available in the GigaStor Gen3 appliance.

Are firmware upgrades separately available?

Firmware and driver updates are only provided through the Observer

installation

program

. Not every release contains firmware or driver updates; in fact, most do

not.

Understanding time stamps

How to reorder packets based on a trailer timestamp

You can change how Observer filters and sorts packets in the Decode pane based

on a timestamp from your switch aggregator rather when GigaStor saw the

packets.
Reordering packets is limited to post capture analysis only; it does not affect

real-time analysis, triggers and alarms, or trending analysis. If you save a packet

capture after it has been reordered using this option, the packets are saved in the

reordered series. If you load a saved, reordered packet capture, then analysis is

based on the reordered time frames and not the time stamps from the GigaStor.

In the GigaStor Control Panel, select the time range of traffic you want to

decode and click

Analyze

GigaStor Analysis Options

opens with the start and end time selected.

Select a filter type.

Select

Reorder and filter based on trailer timestamp

and click Settings.

Trailer Timestamp Settings

opens.

Figure 162: Trailer Timestamp Settings

Содержание Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Результаты поиска

Содержание Apex Enterprise G3-APEX-ENT-32T

Отзывы:

Viavi Apex Enterprise G3-APEX-ENT-32T, Руководство пользователя, Страница: 344 / 380

Результаты поиска

Содержание Apex Enterprise G3-APEX-ENT-32T

Отзывы: