Viavi Apex Enterprise G3-APEX-ENT-32T, Руководство пользователя

Страница: 323 / 380

Software configuration
Chapter 15: Gen3 Capture Card 323
Figure 147: Gen3 capture card properties
See Capture card device properties (page 335) for more explanation of the
capture card properties in Windows Device Manager.
How to create virtual adapters
By default, Observer recognizes a Gen3 capture card as a single network adapter.
However, you can make multiple clones of the capture card, called virtual
adapters , and use each independently.
Prerequisite(s):
Your hardware appliance must have one of the following:
♦
Gen2 capture card
♦
Gen3 capture card
Each virtual adapter is a cloned Gen3 capture card that can have physical ports
assigned to it in any quantity and combination. In this way, Observer can then
see and use multiple network adapters as if they physically existed in your
hardware appliance.
By default, you already have one virtual adapter: it matches the installed Gen3
capture card exactly, unless you accidentally deleted this virtual adapter or
unassigned some of its ports. It can be recreated by following these same steps.