Viavi Apex Enterprise G3-APEX-ENT-32T Скачать руководство пользователя страница 300

Страница: 300 / 380

GSP-8P-6TSSD

300 GigaStor (23 Feb 2018) — Archive/Non-authoritative version

How to create folders for the RAID drives

Create a folder for network data to be stored. By default, the GigaStor Control

Panel saves to a specific directory name on the RAID volumes, so make sure the

folder is available for each volume.
To create folders on your new RAID for the GigaStor appliance to save network

data to, do the following:

Open

This PC

on the Windows desktop.

Navigate to the

drive.

Create a new folder named

Data

Example: D:\Data

You now have folders for the GigaStor to save to. These folder names match the

names given at the factory and—unless you changed the save location—also

match the location saved in the Observer registry keys.

GSP-8P-6TSSD

Sensitive network traffic is stored on your GigaStor. You can permanently delete

this data before sending for maintenance-plan repairs or before decommissioning

an old GigaStor hardware unit.

Prerequisite(s):

These tasks require a hardware appliance GigaStor. These steps cannot be

followed for the GigaStor Software Edition.

In performing a full deletion of the data available on the GigaStor RAID, the

following steps should be completed in the following order across the GigaStor

Control Panel, Windows, and Areca RAID Controller.

Tip!

These instructions are for a specific GigaStor model. See a full listing at

GigaStor (page 253) RAID Wiping and Rebuilding (page 253)

Within the Observer application, delete the GigaStor saved data on the Active

Instance.

Within Windows, perform a

disk format

of the D: volume.

Within the Areca RAID Controller user interface, delete the existing RAID sets

and D: volume.

Within the Areca RAID Controller user interface, create new RAID sets for

immediate or future use.

Stripe the volumes using the Windows Disk Management tool.

Disable the Recycle Bin in Windows for each RAID volume.

Create new data folders for network storage on the RAID.

Completing the above operations will ensure that the previously captured data,

which was saved in the GigaStor RAID, is deleted in such a way that a future data

recovery operation would be nearly impossible.

Содержание Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Результаты поиска

Содержание Apex Enterprise G3-APEX-ENT-32T

Отзывы:

Похожие инструкции для Apex Enterprise G3-APEX-ENT-32T

Бренды по названию

Популярные бренды

Viavi Apex Enterprise G3-APEX-ENT-32T, Руководство пользователя

Результаты поиска

Содержание Apex Enterprise G3-APEX-ENT-32T

Отзывы:

Похожие инструкции для Apex Enterprise G3-APEX-ENT-32T

Бренды по названию

Популярные бренды