Viavi Apex Enterprise G3-APEX-ENT-32T, Руководство пользователя, Страница: 175 / 380

How to set the IP address (GS models)
Chapter 1: Appliance installation 175
1. Log in to the Windows operating system using the Administrator account and
its default password admin .
You can change the Administrator account password after logging in. See the
Windows documentation if necessary.
2. In Windows, choose Start > Control Panel > Network and Sharing Center >
Change adapter settings .
The Network Connections window appears.
3. Right-click ETH0 and choose Properties .
4. Select Internet Protocol Version 4 (TCP/IPv4) , and click Properties .
5. Set the IP address, subnet mask, router or gateway, and DNS server for your
environment and click OK .
Figure 95: Default TCP/IP settings
6. Click OK again to close the Properties dialog for that network connection.
Starting now, all of your interaction with the hardware appliance can now be
done remotely by connecting to the appliance using other Observer Platform
products or Windows Remote Desktop depending on what you want to
accomplish.
How to set the IP address (GS models)
Set the IP address of the hardware appliance while you still have physical access
to it, such as immediately after it is racked and cabled. Setting the IP address
ensures the hardware appliance has a visible and permanent network presence.
Prerequisite(s):
♦
A running Observer Platform hardware appliance.
♦
A KVM switch or keyboard, monitor, and mouse are connected. The user
input devices or KVM switch are only temporarily needed to set the IP
address, so you can disconnect them after the IP address is set.
♦
The IP, subnet, and gateway or router addresses are available and known
to you.