Operation, Installation
External Cleaning
Rev. L0
ATC-5000NG ATC/DME Test Set Operation Manual
1-2-1
February 2020
Subject to Export Control. See Cover Page for details.
Page 3
1.4
EXTERNAL CLEANING
The following procedure contains routine instructions for cleaning the outside of the Test Set.
STEP
PROCEDURE
1
Clean front panel buttons and display face with soft lint-free cloth. If dirt is difficult to remove,
dampen cloth with water and a mild liquid detergent.
2
Remove grease, fungus and ground-in dirt from surfaces with soft lint-free cloth dampened (not
soaked) with isopropyl alcohol.
3
Remove dust and dirt from connectors with soft-bristled brush.
4
Cover connectors, not in use, with suitable dust cover to prevent tarnishing of connector contacts.
5
Clean cables with soft lint-free cloth.
6
Paint exposed metal surface to avoid corrosion.
CAUTION
DISCONNECT POWER FROM TEST SET TO AVOID POSSIBLE DAMAGE TO
ELECTRONIC CIRCUITS.
Avertissement
DÉBRANCHEZ L'ALIMENTATION DU DISPOSITIF DE TEST AFIN D'ÉVITER
D'ENDOMMAGER LES CIRCUITS ÉLECTRONIQUES.
Содержание 138156
Страница 3: ......