ViaSat VMBR-1520 Скачать руководство пользователя страница 71

Страница: 71 / 88

VMBR-1520 Mobile Broadband Router Installation, Operation, and Maintenance Guide

Reshipment

Rev. 001

1075152

7-1

7. Reshipment

To ship the modem to another location, use the carton(s) saved during
the unpacking procedure. Place your contact information inside the

container in case the package is lost or misdirected during shipping.

7.1

Return to the Factory

To prepare the modem for return to ViaSat

, perform the following:

Contact the Network Operations Center (NOC) at ViaSat

and

request a Return Material Authorization (RMA) form and number to

return the equipment. The toll-free telephone numbers are:

Domestic – (888) 272-7232

International - (888) 832-8301

Additional information is available at our customer extranet located
here:

http://extranet.viasat.com/

After receiving the RMA form and number from ViaSat

, complete

the form, and enclose it with the equipment. Make sure all parts of

the RMA form are complete.

Do not remove any modules or attaching cables from the modem.
The modem should be configured as originally received from the

manufacturer. Use the carton saved during the unpacking

procedure in the applicable installation guide if possible.

If shipping from outside the USA, include a commercial invoice with
the following statement:

“American goods being returned for

repair”.

Note

Before returning the

unit, it is important that a
Return Material
Authorization (RMA) form
and number is obtained
from the Network
Operations Center (NOC) at
ViaSat

Содержание VMBR-1520

























































































Результаты поиска

Содержание VMBR-1520

Отзывы:

ViaSat VMBR-1520, Инструкция по установке, эксплуатации и обслуживанию, Страница: 71 / 88

Результаты поиска

Содержание VMBR-1520

Отзывы: