ViaSat VMBR-1520, Инструкция по установке, эксплуатации и обслуживанию, Страница: 41 / 88

VMBR-1520 Mobile Broadband Router Installation, Operation, and Maintenance Guide
Initial Set Up and Configuration
Rev. 001 1075152
3-7
3.3.2.4 Connect to the Hub Test Web Page
On the support PC, open a web browser. At the browser’s address bar,
enter the Uniform Resource Locator (URL), or web address, of the hub’s
test web server, i.e.
http://204.14.40.60
. Check to see what the actual
IP address is. The web browser should display a test web page similar
to the one shown in Figure 3-4.
Figure 3-4. Sample Hub Test Web Page
Click the
Click to start MySpeed
button to begin a speed test. The
Forward and Return Link throughput will be displayed at the end of the
speed test. If necessary, verify that the throughput is consistent with
the end user’s subscription plan.
√ After successfully completing the above steps, initial the table in
Appendix B, and proceed to the next section.
Refer to Paragraph 6.6.5 for troubleshooting procedures if the modem
could not display the hub test web page from the hub test web server.
Note Contact the satellite
operator or service provider
for the hub test web server’s
URL or web address.