ViaSat ViasatHD Pace 3000, Руководство пользователя, Страница: 52 / 98

3
ENGLISH
Welcome to digital satellite TV!
Thank you for choosing the ViasatHD set-top box for viewing your Viasat channel
packages . Please follow the instructions in this User Guide carefully to enjoy all the
advantages of digital satellite TV . We advise you to follow the user instructions and
recommendations supplied with your box, especially for first-time use .
Your box fully complies with international DVB (Digital Video Broadcasting) standards .
❖
Important
This set-top box is designed to reduce its impact on the environment and complies with
European Directive 2009/125/EC . This is part of ARRIS’s ongoing commitment to lead the
way in environmental responsibility .
It has an extra mode of operation known as “passive standby” that needs very little power,
certainly much less than is used in traditional (active) standby . See the table below and
please note that:
◆
By using the passive standby mode you will save energy (and therefore money)
and reduce carbon dioxide emissions that damage the environment .
◆
You use the standby button (
S
) on your remote control (or on the front panel
of your set-top box) to switch between On and active standby .
◆
If you do not press any button, your set-top box will go into active standby
automatically after 4 hours, then after 1 hour, it will go to passive standby (this
is the factory-set value, but you can change it) . Note: Your set-top box cannot
receive any updates from the network in passive standby .
◆
If you will not be using your set-top box for several days, you can cut its energy
consumption to zero by unplugging its 12V power-supply unit from the mains .
Mode Front-panel shows: Typical power
consumption (W)
Typical annual energy use
(kWh)
Passive Standby Standby light is lit red 0 .27 16 .6 *
Active Standby Standby light is lit amber 4 .31 39 .5
**
On Standby light is lit green 5 .37 47 .0
* Based on set-top box being On for 4 .5 hours daily, in Active Standby for 4 hours and Passive Standby for 15 .5
hours .
**
Based on set-top box being On for 4 .5 hours daily and being in Active Standby for 19 .5 hours .
❖
Updates to your box
From time to time, your box may be updated . These updates provide enhanced features;
new screens and menus may become available . Although any new screens and menus may
look a little different from those described in this User Guide, you should be able to use
the same techniques (e .g . highlight and select) with them .
Updates will usually happen in the middle of the night . Your box needs to be in standby to
receive updates .