ViaSat ArcLight Скачать руководство пользователя страница 96

Страница: 96 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

3-26 1081006

Rev.

001

3.3.2.4.2

VMT Filter Options

Figure 3-20. VMT Filter Options Screen.

The VMT List Filter Options screen opens when Filter is clicked on
in the VMT List screen. This screen lets the operator define a set of

filter options to configure what information is displayed on the VMT
List screen.

Name:

Shows ID of the VMT of interest.

IP address:

This field specifies the satellite (management) IP Address of

the VMT whose status is being provided.

SW version:

Software version of the VMT as reported in the VMTLogin

network message.

Login Status:

Select option from pull down list.

Содержание ArcLight

















































































































































































































































































































































































Результаты поиска

Содержание ArcLight

Отзывы:

ViaSat ArcLight, Руководство пользователя, Страница: 96 / 368

Результаты поиска

Содержание ArcLight

Отзывы: