background image

IMPORTANT SAFETY INSTRUCTIONS:

CAUTION: To reduce risk of electrical shock or electrocution:

-  Do not disassemble.  Do not attempt repairs or   

 

  modifications.  Refer to qualified service agencies for all  
  service and repairs.
-  Do not use this product in or area where it can fall or be    
  pulled into water or other liquids.
-  Do not reach for this product if it has fallen into liquid. 
-  Use this compressor with 12-volt DC systems only.
-  This product should never be left unattended during use.

WARNING: To prevent injuries:

-  Never allow children to operate this compressor.   
  Close supervision is necessary when this compressor  
  is being used near children.
-  This compressor will become very hot during and  
  immediately after use.  Do not touch any part of this  
  compressor with bare hands other than the 
  ON/OFF switch during and immediately after use. 
-  Do not use this product near flames or explosive 
  materials or where aerosol products are being used.
-  Do not operate this product where oxygen is  
  being administered. 
-  Do not pump anything other than atmospheric air.
-  Never use this product while sleepy or drowsy.
-  Do not use any tools or attachments without first  
  determining maximum air pressure for that tool  
  or attachment.
-  Never point any air nozzle or air sprayer toward  
  another person or any part of the body.
-  This air compressor is equipped with an Automatic  
  Reset Thermal Protector, and can automatically restart  
  after the thermal protector resets.  Always cut off power    
  source when thermal protector becomes activated.  
-  Wear safety glasses or goggles when operating this product.
-  Use only in well ventilated areas.

200 PSI FAST-FILL AIR SOURCE KIT

USER MANUAL

Содержание 20003











Отзывы: