S
S
S
S
AFETY
AFETY
AFETY
AFETY
IIII
NSTRUCTIONS
NSTRUCTIONS
NSTRUCTIONS
NSTRUCTIONS
Lay this equipment on a reliable flat surface before setting it up.
Always unplug the power cord before inserting any add-on card or module.
Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
Place the power cord in such a way that people cannot step on it. Do not
place anything over the power cord.
Wear a grounded wrist strap when installing components.
Hold components by the edges to prevent damage to the components.
Do not flex or stress the components.
Use the correct screws with the correct threading. Do not over tighten
screws.
If any of the following situations arises, get the equipment checked by a
service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you cannot get it work
according to User's Manual.
The equipment has dropped and damaged.
If the equipment has obvious sign of breakage.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. Do not cover the openings.
Never pour any liquid into the opening. Liquid can cause damage or
electrical shock.
Keep this equipment away from humidity.
Do not leave this equipment in an environment unconditioned or in a
storage temperature above 60
o
C (140
o
F). The equipment may be damaged.
Keep the original packaging and anti-static bag in case the unit has to be
returned.
Do not attempt to power-on the system if there is damage to any of its
components.
Caution
Caution
Caution
Caution::::
Only use the appropriate battery specified for this product.
Do not reuse, recharge, or reheat an old battery.
Do not attempt to force open the battery.
Do not discard used batteries with regular trash.
Discard used batteries according to local regulations.
