14
VIA Mobile360 D700 EVK Quick Start Guide
3.3.1 Installation with AI Features
To increase the accuracy of the FCW and LDW detection results, the installation guidelines below should be followed.
• The VIA Mobile360 D700 device should be installed in the center of the windshield with a tolerance of +/- 10cm to either side of the front camera lens.
• The installation height should be between 1.0m ~ 2.2m off the ground.
• The front ADAS camera's lens must not be obstructed by the windshield wipers of the vehicle.
• It is recommended to connect the VIA Mobile360 D700 device to the OBD II port in the vehicle to be able to get the real vehicle speed. This is a critical input to
determine the TTC (Time to Collision) for the FCW warning.
• For DSS, the interior camera should be no further than 90cm in front of the driver and no further than 40cm to the side of the driver's face. (Measured from the
center of the face.) See the table below for a quick reference for optimal results based on different installation locations:
Distance to Driver
30cm
40cm
50cm
60cm
70cm
80cm
90cm
Max Offset from Driver
13cm
18cm
22cm
27cm
31cm
36cm
40cm
Note:
If the above criteria cannot be met, make sure the driver's head is within the bounding box during the calibration process to ensure reliable detection. See
below.
