VIA EPIA-P910 User Manual
37
6.5.7.
OnBoard Device Configuration
The OnBoard Device Configuration screen has the following features.
Figure 41: Illustration of OnBoard Device Configuration screen
6.5.7.1.
OnBoard LAN Enable
The OnBoard LAN Enable feature determines whether the onboard LAN controller will be used or not.
6.5.7.2.
EuP/ErP Lot6 support
The EuP/ErP Lot6 Support feature enables the BIOS to reduce the power draw to less than 1W when the
system is in standby mode. This feature has two options: enabled and disabled.
6.5.7.3.
S5 Wakeup On LAN
The S5 Wakeup On LAN feature enables the BIOS to allow remote wake-up from the S5 power off state
through the PCI bus.
6.5.7.4.
1CH LVDS Backlight Control
Backlight Control
The Backlight Control feature control by VX11H enables the user to control the brightness of the 1CH
LVDS backlight. This feature has six options.
Level
0%, 20%, 40%, 60%, 80% and 100%.
Содержание EPIA-P910
Страница 15: ...VIA EPIA P910 User Manual 5 1 4 Product Dimensions Figure 2 Mounting holes and dimensions of the VIA EPIA P910...
Страница 16: ...VIA EPIA P910 User Manual 6 1 5 Height Distribution Figure 3 Height distribution of the VIA EPIA P910...
Страница 59: ...VIA EPIA P910 User Manual 49 6 8 8 Restore Defaults Restore default values for all setup options...