VHF S5, Руководство по эксплуатации, Страница: 53 / 320

8.15 Maintenance table
If your machine is used for wet machining, additional maintenance is required that is not listed in this table.
The maintenance tasks are described in the operating instructions for the vhf wet grinding module.
The operating instructions are delivered with the vhf wet grinding module. They are also available for down-
load at: https://www.dentalportal.info/NO1
Several times per day
Task Recommended interval Procedure / Parts Tool illustration
Checking the external compressed
air lines for damage
Before switching on the
machine
Visual check
Checking the suction hose for
damage
Before switching on the
machine
Visual check
Once per day
Task Recommended interval Procedure / Parts Tool illustration
Checking the compressed air regu-
lator
(

page 48
)
Before work
Clean or exchange cartridge
in case of visible contam-
ination or every 2 years
If necessary, new filter cart-
ridge
Daily cleaning of the working
chamber
(

page 44
)
After work
If soiled
Vacuum cleaner, Brush, Dry
cloth
Once per week
Task Recommended interval Procedure / Parts Tool illustration
Cleaning the collet chuck
(

page 46
)
Once per week
In case of rotational imper-
fections
Spindle service set
Cleaning the blank magazine
(

page 45
)
Once per week
If soiled
Wet cloth, Dry cloth
When necessary
Task Recommended interval Procedure / Parts Spare part illustration
Updating the software and firm-
ware
(

page 52
)
When an update is available
Cleaning the housing
(

page 49
)
Microfiber cloth, Water, Mild
cleaning agent (optional)
Exchanging the main fuse
(

page 50
)
Replacement fuse T6,3A
L250V
S5 – Maintenance and do-it-yourself
EN 53
Original Operating Instructions: S5
Version: 12/15/2021