background image

Software Installation

38

5.4.1 INTRODUCTION

The 

AudioRack

32

 

enables you to take advantage of your computer's audio

capabilities with all of the controls conveniently in one compact space. You can play
audio CDs, wave files (in .WAV and .AUD formats), and MIDI files (in .MID and
.RMI formats). With the multi-source Audio Mixer, you can blend these sources
with line-in and microphone sources any way you choose. Add tone control and
spatialization to your computer with the 3-D/Tone Controller. You can then record
your creations as wave files and edit them with the Audio Recorder.

The 

AudioRack

32 has six main parts:

 

Command Center

customizes the appearance of the AudioRack32.

 

3-D/Tone Controller

adds 3-D stereo and tone controls to the AudioRack32.

 

Audio Mixer

controls the volume and balance of the AudioRack32 devices.

 

Digital Audio Player

plays and records files in the .WAV format.

 

MIDI Player

enables you to play MIDI files.

 

Compact Disk Player

enables you to play audio CDs on a CD-ROM drive.

In addition, the 

AudioRack

32 has a miniature mode enabling you to control the

AudioRack

32

 

while using minimal screen space.

The Audio Recorder is a separate application from the 

AudioRack

32. It can be used

to add effects and edit files recorded with the Digital Audio Player or by the Audio
Recorder itself. The Audio Recorder can be launched from the 

AudioRack

32 Digital

Audio Player or on its own.

5.4.2 INSTALLING THE AudioRack32

Placing the ESS ES1869 Sound Driver & Utility Disk 2 diskette in a floppy drive,
click Start on the taskbar and choose Run from the popup menu.

Содержание GMB-P6EIMG

















































Отзывы: