manualshive.com logo in svg

Vetter Smartfork, Руководство по эксплуатации

Поделиться
Скачать
Vetter Smartfork Скачать руководство пользователя страница 47

Fig. 28: VETTER SmartFork

®

 Distance

Particularly helpful when lifting and putting down a load in narrow block

storage or in niches with poor visibility.

1.

Switch on the industrial truck. The power to the VETTER Smart

Fork

®

 Distance

application is supplied by the ignition of the industrial truck.

ð

The display medium can now be switched on.

2.

Switch on the display medium. Other controls are not available.

ð

The distance function is now ready for use.

3.

Pick up the load.

4.

Move the load to a small niche or to a wall, for example.

ð

The distance between the fork tips and e.g. the wall is displayed on the display

medium.

5.

Use the information on the display medium to put down the load in a space-efficient

position.

All settings for the VETTER SmartFork

®

 Distance application are in the

supplied operating manual for the display medium.

Operation of

the distance

function

  Operation of the VETTER SmartFork

®

VETTER SmartFork® Distance

V1.08/2019

SmartFork

®

- The intelligent SensorFork

47

Содержание Smartfork































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды