Vetter Smartfork Скачать руководство пользователя страница 40

Страница: 40 / 62

Switch on the industrial truck. The power to the monitor is supplied by the ignition of

the industrial truck.

The camera monitor can now be switched on.

Switch on the camera monitor. Other controls are not available.

The area between the fork tips is displayed on the camera monitor via the side

camera.

Move the fork arms in front of the load to be lifted. Pick up the load.

When the load has been completely picked up, the area in front of the fork tips

is shown on the camera monitor via the front camera.

All settings for the VETTER SmartFork

PremiumCam are in the sup-

plied operating manual for the monitor and the applicable documents.

5.4

VETTER SmartFork

Laser

CAUTION!
Risk of blinding from laser beams!

The line laser target function uses class 2M laser beams. There is a risk

of blinding.

In addition, there is a risk of damage to eyes when deliberately looking

into the beam path for a prolonged period.

–

Do not look into the beam and do not directly observe the beam with

optical instruments (e.g. magnifying glass or binoculars).

Technical data on the laser used can be found in the supplied documents

or can be requested from customer service

“Customer service”

on page 3.

Operation of

the camera

switch func-

tion

Operation of the VETTER SmartFork

VETTER SmartFork® Laser

V1.08/2019

SmartFork

- The intelligent SensorFork

Содержание Smartfork































































Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды

Vetter Smartfork, Руководство по эксплуатации

Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды