Vetland V1410, Руководство пользователя

Страница: 110 / 113

V1410 / V1412 User Manual
110
Recommended RF Separation Distance
The V1410 / V1412 Monitor is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the V1410 / V1412 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communication equipment (transmitters) and the V1410 / V1412 as recommended below, according to
the maximum output power of the communications equipment.
Rated Maximum
Output Power of
transmitter
[W]
Separation Distance According to Frequency of Transmitter
[m]
150kHz to 80 MHz 80MHz to 800 MHz 800MHz to 2.5GHz
V
1
=3 Vrms E
1
=3 V/m E
1
=20 V/m E
1
=3 V/m E
1
=20 V/m
0.01 0.12 0.11 0.02 0.23 0.04
0.1 0.37 0.36 0.06 0.73 0.11
1 1.17 1.16 0.18 2.33 0.35
10 3.69 3.68 0.55 7.37 1.11
100 11.66 11.66 1.75 23.33 3.50
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where p is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects, and people.
Immunity and Compliance Level
Immunity Test
Frequency of Interest
(MHz)
Actual Immunity Level
Conducted RF
IEC 61000-4-6
0.15 MHz to 80 MHz 3 Vrms
Radiated RF
IEC 61000-4-3
80 MHz to 2.5 GHz 3 V/m
80 MHZ to 2.5 GHz 20 V/m