Vestil ZLTT Series, Инструкция по эксплуатации

Страница: 3 / 15

Table of Contents Rev. 5/8/2019 ZLTT MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 3 of 15
Hazards
We strive to identify all hazards associated with the use of our products. However, material handling is dangerous
and no manual can address every risk. The end-user ultimately is responsible for exercising sound judgment at all
times.
Material handling is dangerous. Improperly or carelessly operating this table might result in serious
personal injuries.
• Failure to read and understand the entire manual before assembling, using or servicing the product
constitutes misuse . Read the manual whenever necessary to refresh your understanding of proper use and
maintenance procedures.
• DO NOT use the table unless it is in normal operating condition. Inspect the unit as described in the Inspection
instructions on p. 12-13 to determine whether it is functioning normally. DO NOT use the machine unless it passes
every part of the inspection or until it is restored to Original Condition .
• DO NOT use the machine to support people. This table is designed only for material handling.
• Always watch the tabletop carefully, as well as the load/container, while raising and lowering it.
• This crane is designed for material handling ONLY. DO NOT use the crane to lift people.
• ALWAYS load the table properly. See Loading the table on p. 10.
• If repairs are necessary, ONLY install manufacturer-approved replacement parts.
• The tabletop should move smoothly and evenly. Watch for binding or jerky movement and listen for unusual noises.
Remove the unit from service if you observe anything abnormal.
•
DO NOT use this table UNLESS all labels are in place & readable. See
Labeling diagram
on p. 12.
• DO NOT modify this product in any way. Modifying the machine automatically voids the Limited Warranty and might
make it unsafe to use.
Proper use and maintenance are essential for this product to function properly.
• Always use this product in accordance with the instructions in this manual.
• Periodically lubricate pivot point with bearing grease.
• Keep the product clean & dry at all times. Always use the unit indoors.
• Only use approved replacement parts. To order replacement or spare parts for this equipment, contact Vestil.
Hydraulic circuit diagram: