Rev. 7/2/2020
PM5-BR MANUAL
Copyright 2020 Vestil Manufacturing Corp. Page 2 of 6
SIGNAL WORDS
This manual uses SIGNAL WORDS to draw attention to uses of the product that could result
in personal injuries, as well as the probable seriousness of those injuries. Other signal words call
attention to uses likely to cause property damage. Signal words that might be used in this manual
appear below along with their definitions.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the hopper.
SAFETY INSTRUCTIONS
Vestil strives to identify foreseeable hazards associated with the use of its products. However, no
manual can address every conceivable risk. The most effective way to avoid injury is to exercise sound
judgment when assembling, using, inspecting, and maintaining this product.
Keep a copy of this
manual with the product at all times.
For example, put a copy inside a plastic pouch and attach the
pouch to the frame.
Anyone who uses this product must be made aware that a copy of the manual
is available and where to find it.
Improper or careless assembly, installation, use, or maintenance of this product could result in
serious personal injuries.
•
Read and understand the entire manual before assembling, installing, using or servicing the
product.
•
Read the manual to refresh your understanding of proper use and maintenance procedures.
•
DO NOT attempt to resolve any problem(s) with the product unless you are both qualified to do so and
certain
that it will be safe to use afterwards.
•
DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unapproved
modifications automatically void the
and might make the product unsafe to use.
•
DO NOT engage or transport loads with your pallet truck/jack that are taller than the back rest.
•
Inspect the product before each use.
A. DO NOT use this product if the inspection reveals structural damage. Examples of structural damage
include, but are not limited to, the following: 1) Cracked, broken warped, or damaged frame; 2)
cracked welds; 3) corrosion, severe wear, or other condition that affects the integrity of the product.
DO NOT use the product until it is fully restored to satisfactory condition.
B. DO NOT use the product if any unusual noise or movement is observed. Remove the unit from
service and notify your supervisor & maintenance personnel about the issue.
•
DO NOT use this device UNLESS all product labels (see
) are readable and
undamaged.
Proper use, maintenance, and storage are essential for this product to function properly.
o
Always use this product in accordance with the instructions in this manual and consistent with any training
relevant to machines, devices, etc. used in conjunction with this product.
o
Keep the product clean & dry. Lubricate moving parts. Store the product indoors. DO NOT use it in rain,
snow, etc.
o
FOR HYDRAULIC UNITS: Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, use
an anti-wear hydraulic oil with a viscosity grade of 150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron
transmission fluid.
o
Contact the manufacturer for SDS documentation
