Vestil JIB-CB Series Скачать руководство пользователя страница 1

Rev. 9/21/2016 

JIB-CB, MANUAL 

Copyright 2016 Vestil Manufacturing Co. 

Page 1 of 11 

 

 

 
 

 

V

ESTIL 

M

ANUFACTURING 

C

ORP

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

www.vestilmfg.com e-mail: 

HU

[email protected]

U

 

 

JIB-CB Counterbalanced Jib Cranes 

Instruction Manual 

 

 

 

 
 
 

 

 

 

 

 

 
 
 
 

 
 
 

 

Receiving instructions:

 

After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging. 

Inspect the product closely to determine whether it sustained damage during transport. 

If damage is discovered, 

immediately record a complete description of the damage on the bill of lading

. If the product is undamaged, 

discard the packaging. 

NOTICES:

 

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the 

product is 

used 

is exclusively the responsibility of the owner/end-user. 

2) VESTIL is 

not liable 

for any injury or property damage that occurs as a consequence of failing to apply either: 

a) Instructions in this manual; or 
b) Information provided on labels affixed to the product. 

 

Vestil is not responsible for 

any 

consequential damages sustained while assembling, using, or maintaining this 

product. 

Table of Contents

 

Product specifications…………………………………………………………………………………………………………  2 
Signal words……………………………………………………………………………………………………………………  2 
Safe use recommendations……………………………………………………………..……………………………………  3 
Function tests…………………………………………………………………………………………………………………..    3 
FIG. 1: Exploded parts diagram and bill of materials………..……………………………………………………………..  4 - 6 
Assembly instructions…………………………………………………………………………………………………………   6 - 7 
Operation instructions…………………………………………………………………………………………………………  8 - 9 
Inspections & Maintenance…………………………………………………………………………………………………... 9 
Labeling diagram………………………………………………………..…………………………………………………….. 

   

10 

Limited warranty………………………………………………………………………………………………………………..  11 

Содержание JIB-CB Series












Отзывы: