11
HYDRAULIC DIAGRAM - HDC-305
• WARNING: Care should be taken to identify all potential hazards and comply with applicable safety procedures before
beginning work. Fully lower the carriage and ensure that system pressure and power have been removed before attempting
to work on any of the hydraulic components!
• Only qualified individuals trained to understand mechanical devices and their associated electrical and hydraulic circuits
along with the hazards that could result from them, should attempt troubleshooting and repair of this equipment.
• Caution: Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, uses an anti-wear hydraulic fluid with
a viscosity of 150 SUS at 100°F (ISO 32 at 40°C) or a non-synthetic transmission fluid.
E
N
G
L
I
S
H
