Vestil CARPET-45, Инструкция по эксплуатации

Страница: 3 / 5

Table of Contents Rev. 5/15/2019 CARPET-45 MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 3 of 5
EXPLODED VIEW AND BILL OF MATERIALS
ASSEMBLY
1) Insert the axle into the axle receiver. The axle is longer than the receiver and will stick out of both sides of
the receiver.
2) Slide a wheel onto each end of the axle. Make sure
that the wheels are oriented with the valve stems facing
outwards, i.e. away from the cart.
NOTE: Foam filled wheels (CART-45–FF) do not require
inflation.
Item Part no. Description Qty.
1 33-112-036 Axle,
5
/
8
” x 26” 1
2 16-132-126 Pneumatic tire 2
3 33-514-129 Weldment, frame 1
4 65077
Cotter pin, zinc-plated,
1
/
8
” x
1
1
/
4
”
2
3) Press a cotter pin through the pin hole at
each end of the axle. Then, bend the arms of the
cotter pins in opposite directions around the
axle.
Axle
Frame
Axle
receiver
Cotter pin