Vestil AWST-3672-PU, Руководство пользователя

Страница: 2 / 5

Table of Contents Rev. 9/29/2020 AWST MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 2 of 5
SIGNAL WORDS
This manual uses SIGNAL WORDS to draw attention to uses of the product that could result
in personal injuries, as well as the probable seriousness of those injuries. Other signal words call
attention to uses likely to cause property damage. Signal words used in this manual appear below
along with the definition of each word.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.
SAFETY INSTRUCTIONS
Vestil strives to identify all foreseeable hazards associated with the use of its products. However,
material handling is dangerous and no manual can address every conceivable risk. The most effective
way to prevent injury is to apply sound judgment whenever using this device.
Improper or careless use of this product could result in death or serious personal injuries.
•
Read and understand the entire manual before assembling, installing, using or servicing the
product.
•
Center and evenly distribute loads on the surface of the truck.
•
Do not attempt to transport unstable, top-heavy, very tall or very long items with the truck. Start and
stop slowly and gradually. Apply brakes carefully. Drive slowly through all turns. Only drive on even,
level, improved surfaces.
•
Read the manual to refresh your understanding of proper use and maintenance procedures.
•
DO NOT attempt to resolve any problem(s) with the product unless you are qualified to do so and
certain
that it will be safe to use afterwards.
•
DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil.
Unapproved modifications automatically void the
LIMITED WARRANTY
and might make the product
unsafe to use.
•
DO NOT exceed the capacity. Capacity information is provided on label 287. See LABELING
DIAGRAM on p. 4.
•
Inspect the product as directed in INSPECTIONS AND MAINTENANCE on p. 4.
A. DO NOT use this product if the inspection reveals: 1) Cracked, broken or significantly deformed
load-bearing members (frame; casters/wheels); 2) cracked welds; 3) corrosion, severe wear, or other
condition that affects the structural integrity of the truck. Replace each part that fails to pass an
inspection, and DO NOT use the product until it is fully restored to normal condition.
B. DO NOT use the product if any unusual noise or movement is observed. If a malfunction occurs,
remove the unit from service and notify your supervisor & maintenance personnel about the issue.
•
DO NOT use this device UNLESS all product labels are readable and undamaged. See LABELING
DIAGRAM on p. 4.
Proper use, maintenance, and storage are essential for this product to function properly.
o Always use this product in accordance with the instructions in this manual and consistent with any
training relevant to machines, devices, etc. used in conjunction with this product.
o Keep the product clean & dry. Lubricate moving parts.