15
How to External Vacuum and Seal a Pouch
In order to extend the life of your vacuum sealer, we
strongly recommend pausing at least 20 seconds between
each seal.
1.
Choose a suitable sized vacuum pouch and place item in
pouch, allowing a minimum of 2 inches (5 cm) between the
item and top of pouch.
2.
Press the “Seal” button and then use the "
▲
" or "
▼
" buttons to
select the desired sealing time. The value will be stored and
used with each operation until either changed or a factory
reset is performed.
3.
Press the clip down to lock it out of the way into the lower
body.
4.
Select the desired vacuum mode by either pressing the
“Vac&Seal” or “Pulse Vac” button.
5.
Place the open end of the vacuum pouch over the seal bar,
leaving the rest of the pouch with the item outside.
