Vesta Precision C20v Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 23

Vesta Precision C20v Скачать руководство пользователя страница 17

16

TROUBLESHOOTING

Under the proper circumstances, your vacuum sealer will
provide years of problem-free use. Under certain circumstances,
issues may arise. Please consult the troubleshooting information
and error codes below prior to contacting technical support.

Fails to operate

•

Make sure the machine is plugged into an electrical outlet.

•

Check the power cord for damage. If the cord is damaged
or frayed, do not operate the machine and contact Vesta
Customer Care.

Does not completely vacuum or seal automatically

•

Check for proper placement of pouch inside the chamber
and that the open end of the pouch is smooth and wrinkle-
free.

•

Check the gasket is not loose or damaged.

•

Check and clean the seal foam and gasket as needed.
Food particles will interfere with the vacuum process.

•

Ensure the lid is locked.

•

Check the pouch for leakage and use a new pouch if
leakage is found.

Vacuum pouch loses vacuum after being sealed

•

Wrinkles, liquid, or food particles in the seal will cause this
issue. Remove the seal, clean the mouth of the pouch, and
vacuum & seal again. In the case of liquid in the seal or juicy
foods, pre-freeze item before vacuum packaging.

Fails to seal

•

Allow the machine to rest 20 seconds between sealing.

•

Ensure the open end of the pouch is free of wrinkles, food
particles, and liquids. Clean the open end of the pouch
before re-sealing.

«
...
15
16
17
18
19
...
»

Содержание C20v
























Отзывы:

Нет отзывов