Vess R2000 SERIES Скачать руководство пользователя страница 564

Страница: 564 / 705

537

Product Manual

Maintenance

PDAtIng

hySIcAl

RIVe

IRMwARe

This feature applies only to PROMISE-supported physical drives. For a list of supported drives, go to PROMISE

support: http://www.promise.com/support/.

If you have physical drives in your RAID system that are not PROMISE-supported, follow the firmware update

procedure from the drive manufacturer.

paM pro

Download the latest firmware image file from PROMISE support:

http://www.promise.com/support/ and save it to your Host PC or TFTP server.

To update the firmware on PROMISE-supported physical drives:

1. Click the

Administration

tab.

2. Click the

Firmware Update

icon.

3. Click the

PD Firmware Update

tab.

4. Choose a download option:

• Local File through HTTP

– Click the

Browse

button, locate the firmware

image file, click the file to choose it, then click the

Open

button.

• TFTP Server

–

Enter

the TFTP Server host name or

IP address, port number and file name.

5. Click the

Next

button.

6. Click the

Submit

button.

The progress of the update displays.

When the update is completed a message tells you to reboot the subsystem.

7. Click the

button.

Restart the RAID subsystem. See “Restarting a Subsystem” on the next page.

Warning
Do NOT power off the RAID subsystem during the update!
Do NOT move to any other screen until the firmware update operation is

completed!

Содержание R2000 SERIES
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Vess R2000 SERIES, Руководство по эксплуатации продукта

Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды