Vess R2000 SERIES Скачать руководство пользователя страница 559

Страница: 559 / 705

532

Vess R2000 Series Product Manual

Promise Technologies

during the firmware update. Updates with this option take a longer period of time to complete. All Vess

R2600 models support this feature.

6. Click the

Next

button.

The next screen shows the Flash Image (firmware image file) Version Number and Build Date.

7. Click the

Submit

button.

8. In the

Confirmation

box, type the word “

confirm

” in the field provided and click the

Confirm

button.

The progress of the update displays.

When the update is completed a message tells you to reboot the subsystem,

9. Click the

button.

• If you chose the Disruptive Flash Method, the RAID subsystem

and JBOD expansion units automatically restart.

• If you chose the Non-Disruptive Flash Method, the system automatically

flashes and restarts the RAID controllers one at a time.

utOMAtic

estArt

If you did NOT check the NDIU box, the RAID subsystem and JBOD expansion units automatically restart. That

action temporarily disrupts I/O operations and drops your WebPAM PROe connection.

To reestablish your WebPAM PROe connection:

1. Wait no less than two minutes.

2. Click

Logout

in the WebPAM PROe Header, then log in again.

If you cannot log in, wait 30 seconds and try again.

3. In your browser, click Logout in the WebPAM PROe Header, then log in again.

If you cannot log in immediately, wait 30 seconds and try again.

Warning

Do NOT power off the RAID subsystem during the update!
Do NOT move to any other screen until the firmware update operation is

completed!

Содержание R2000 SERIES
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Vess R2000 SERIES, Руководство по эксплуатации продукта

Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды